Overbanding & Crack Infill Products
Safetrack Overbanding Kits BBA/HAPAS Approved
Safetrack Overbanding Kits Cold Applied BBA/HAPAS Approved skid resistant resin and Activator system. Specifically designed for the use of cracks up to 5mm wide.
The kit contains 1 x 8kg Resin tin, 80g bag BPO Catalyst Powder, 1 small bag Aggregate for over scatter
Safetack Crack Infill 25kg kit BBA/HAPAS Approved
Safetrack fretted joints / Crack Infill Kits Cold Applied BBA/HAPAS Approved skid resistant resin and Activator system. Specifically designed for the use of cracks in excess of 5mm wide.
Developed to provide the same high quality repair as Safetrack Overbanding where the crack has been allowed to develop. In addition, this system is also suitable to repair 'fretted' or 'open' joints in asphalt pavements and road surfaces. Safetrack Crack Infill arrests further joint decay by filling the gap and supporting the edges of the asphalt which also stops water from penetrating the road structure below.
The kit contains 1 x 25kg Resin tin, 250g bag BPO Catalyst Powder, 1 small bag Aggregate for over scatter
Overbanding rolls BBA/HAPAS Approved
Overbanding Tape is a preformed overband tape system for the permanent repair of open seams, joints or cracks.
Used as a simple overband, it will repair defects up to 5mm wide. TexBand Tape is a long lasting, rapid solution for sealing surfaces following road repairs and utility works.
OverbandingTape provides an effective torch on system for the repair of cracks, seams and joints on highway surfaces up to 5mm wide.
Overbanding Tape is designed to have a high surface skid resistance throughout its life.
The binder system of theTape contains plasticised rosin ester blended with selected polymers. The product incorporates aggregates to produce a fine textured finish with an SRV of ≥60 to comply with DMRB (Vol.7 Section 4) HD 31/94 Para.2.10/11.
• Simple torch on application provides an overband seal.
• No need for large scale application equipment – just a gas torch
- Provides long term skid resistance due to the aggregates used.
• Environmentally friendly - no waste or loose chippings.
• Can be laid all year around.
• Fast curing times - typically under 5 mins at ambient temperature.
Bitumen Overbanding 10mtr roll
Bitumen Overbanding Tape is a blend of polymer modified bitumen in tape form, protected by a disposable release film.
Overbanding Tape is used for surface sealing of open seams or cracks up to 5 mm width in road pavements on secondary roads.
Service Temperature: -20°C to +80°C
Bitumen Overbanding Tape; has excellent resistance to water, acids, alkalis and salts, and prevents further cracking and spalling of the road surface.
Quick and easy to apply, fast installation, trafficable in 10 mins, elastic qualities to accommodate thermal movement, no waste.