Bitumen Edge & Joint Sealers
Bitumen Cold Joint Sealer and Tack Coat Aerosol 600ml Can
Cold Applied Bitumen Spray perfect for sealing vertical and horizontal joints.
Can also be used as a tack coat on small reinstatements by spraying onto the surface before the application of asphalt or macadam.
The use of bitumen cold joint sealer will significantly enhance the performance of the reinstatement by preventing the ingress of water and the freeze / thaw effect.
Bitukold Cold Joint Sealer 15kg tub
Bitukold is a brushable grade Bitumen emulsion which on small reinstatements can also be used as a tack coat, thereby saving on the need to use a separate tack coat emulsion.
Bitukold is mainly used for the protection of new joints in freshly laid asphalt or macadam.
H4 Block Bitumen 25kg tin
H4 is a hot poured 50/70 grade joint sealant designed for the treatment of reinstatements and asphalt overlays.
H4 is a CE Marked paving grade bitumen complying to BS EN12591:2009 which also complies with BS 594987 clause 6.8 Joints.
H4 is suitable for jointing as required in Clause 903.22(i) of Volume 1 of the Specification for Highway Works.
K140 Tack Coat Bitumen Emulsion
K140 Tack Coat is a bitumen emulsion, when cured it forms a thin uniform film of bitumen on the road surface which gives an adhesive bond between a bituminous overlay and an existing surface.
Bitumen Overbanding 10mtr x 35mm rolls
Bitumen Overbanding Tape is a blend of polymer modified bitumen in tape form, protected by a disposable release film.
Overbanding Tape is used for surface sealing of open seams or cracks up to 5 mm width in road pavements on secondary roads.
Service Temperature: -20°C to +80°C
Bitumen Overbanding Tape; has excellent resistance to water, acids, alkalis and salts, and prevents further cracking and spalling of the road surface.
Quick and easy to apply, fast installation, trafficable in 10 mins, elastic qualities to accommodate thermal movement, no waste.