Overbanding & Crack Infill

SAFETRACK OVERBANDING KIT (BBA/HAPAS APPROVED)

Safetrack Overbanding is a highly durable skid resistant overbanding system, developed to extend the life of asphalt & concrete by sealing cracks in the road surface and is suitable for cracks up to 5mm wide. Unlike bitumen based overbanding, Safetrack Overbanding offers thermal stability and high skid resistance, both of which are retained over time.

These features combined with the system's matt (non-glare) asphalt grey colour, improve driver safety while extending the life of asphalt and concrete road surfaces.

The system is cold applied with no hot trades; it does not ‘spread’ under traffic load and is resistant to most common chemicals, fuels & oils. Safetrack Overbanding is set to reverse the negative thinking that was in danger of discrediting this potentially very effective, low cost road repair method.

Available in 8kg Kits

*****

SAFETRACK CRACK INFILL (BBA/HAPAS APPROVED)

Safetrack Crack Infill is a skid resistant, highly durable infill system for cracks in excess of 5mm.

Developed to provide the same high quality repair as Safetrack Overbanding where the crack has been allowed to develop. In addition, this system is also suitable to repair 'fretted' or 'open' joints in asphalt pavements and road surfaces. Safetrack Crack Infill arrests further joint decay by filling the gap and supporting the edges of the asphalt which also stops water from penetrating the road structure below.

Incorporating skid resistant aggregate in the MMA resins ensures a high SRV throughout its service life. Minimal preparation and simple application techniques enable the treatment of long joints and cracks whilst the material's fast-curing property ensures that road-use may resume in as quickly as 30 minutes.

This system rapidly fills cracks with minimal preparation giving long-term protection whilst ensuring safe-application.

Available in 25kg kit

*****

INSTABAND OVERBANDING ROLLS (BBA/HAPAS APPROVED)

A Thermoplastic skid-resistant overbanding and crack sealant tape designed for application to asphalt surfaces to prevent water ingress and progressive fretting, which leads to road structural failure. Prevents water ingress instantly, and can be trafficked immediately.

Cools and hardens within 5-10 minutes.

Available in 12 x 5mtr rolls per box

*****

TEXBAND OVERBANDING ROLLS (BBA/HAPAS APPROVED)

TexBand Tape provides an effective torch on system for the repair of cracks, seams and joints in highways surfaces. TexBand Tape is designed to have a high surface skid resistance throughout its life.

The binder system of TexBand Tape contains a plasticised rosin ester blended with bitumen and selected polymers. The product incorporates aggregates to produce a fine textured finish.

Available in 12 x 5mtr rolls

**********